Citizen CL-S700R ユーザーズマニュアル
Chapter 3 Disassembly and Maintenance
3-5. Disassembly, Reassembly and Lubrication
3-37
CL-S700/CL-S703/CL-S700R
(3) Removing the “Door, Rewinder” and “SA1, Peeler”
1. Remove the Rewinder Mechanism block referring to above “
Note: To remove the “Door, Rewinder” alone, it is not necessary to detach the Rewinder
Mechanism block. You can remove it after opening the Rewinder cover.
2. Remove 4 screws (PHT (#2), M3x6) and detach the “Frame2, Door Center”.
3. Remove 4 screws (PHT (#2), M3x6) and detach the Handle and Rewinder Door.
3. Remove 4 screws (PHT (#2), M3x6) and detach the Handle and Rewinder Door.
Note on reassembling:
•
•
When attaching the “Door, Rewinder”, run the Peel sensor cable along the door frame
as shown in the figure (See the “Cable path”).
as shown in the figure (See the “Cable path”).
4. Remove 2 screws (PH (SW+PW), M3x5) and detach the “SA1, Peeler”.
Note on reassembling:
•
•
Pass the cable (J503) through the left opening “A” as shown in the figure.
Door, Rewinder
Handle
SA1, Peeler
PH (SW+PW), M3x5
PHT (#2), M3x6
PHT (#2), M3x6
PHT (#2), M3x6
(To J503)
(To J504)
(Cable path)
(Cable path)
Frame2, Door Center
A