Canon 700 Series ユーザーズマニュアル

Transferring Documents

Special Sending/Receiving F

eatures

An asterisk (*) indicates the default setting.

5. TIME SETUP

Sets the time for the machine to enter and leave the 
Transfer mode. If you do not set the timer, you can still 
switch the Transfer mode ON/OFF manually. 

1.START TIME

Sets a specified time for the machine to automatically start 
the transfer operation.

EVERYDAY*

Sets the machine to start the transfer operation everyday. You 
can set up to five start times for every day of the week.

SELECT DAYS

1.SUN to 7.SAT
Sets the machine to start the transfer operation only on 
selected days of the week. You can set up to five start times 
for any of the selected days.

2.END TIME

Sets a specified time for the machine to end the transfer 
operation, and return to normal operations.

EVERYDAY*

Sets the machine to end the transfer operation everyday. 
You can set up to five end times for every day of the week.

SELECT DAYS

1.SUN to 7.SAT
Sets the machine to end the transfer operation on the 
selected days of the week. You can set up to five end times 
for any day that you select.

6. PRINT RX DOC.

If your machine is the transfer unit, this setting determines if 
your machine prints a copy of every document it transfers.

OFF*

Received and transferred documents are not printed at the 
transfer unit. 

ON

A copy of every document received and transferred is 
printed at the transfer unit.

# OF RX 
COPIES

If you turn PRINT RX DOC ‘ON’, use this setting to specify 
the number of copies you want to print (01 to 99). Use the 
numeric keys to enter the number, or press [

▼] or [▲] to 

increase or decrease the number 

➞ press [Set].

Default setting: ‘01COPIES’*