HP (Hewlett-Packard) NG879UPABA ユーザーズマニュアル
Bluetooth module cable
NOTE:
The Bluetooth module cable is included in the Cable Kit, spare part number 492555-001.
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the following components:
a.
Primary hard drive (see
)
b.
c.
Optical drive (see
) or Secondary hard drive (see
d.
Switch cover and keyboard (see
e.
Display assembly (see
)
f.
Top cover (see
Remove the Bluetooth module cable:
1.
Release the Bluetooth module cable (1) from the opening in the base enclosure.
2.
Disconnect the Bluetooth module cable (2) from the system board.
3.
Remove the Bluetooth module cable.
Reverse this procedure to install the Bluetooth module cable.
Component replacement procedures
85