HP (Hewlett-Packard) 800CT ユーザーズマニュアル
61
5. Lastly, remove the keyboard flex cables from the zero insertion force slots. If available, use
the provided Keyboard Flex Cable Removal Tool (part number 5182-7482) to assist in
“opening” the zero insertion force slots. Otherwise, a pick may be used to gently lift up the
top of the slots. See Figure 30.
“opening” the zero insertion force slots. Otherwise, a pick may be used to gently lift up the
top of the slots. See Figure 30.
C
AUTION
:
To avoid damage to the solder joints, do not open the zero force insertion
connectors by prying against the case of the OmniBook.
connectors by prying against the case of the OmniBook.
Replacement Procedure
1. To replace, reverse the Removal Procedure. Once reconnected, the keyboard flex cables
1. To replace, reverse the Removal Procedure. Once reconnected, the keyboard flex cables
must be tucked properly into the frame. See Figure 31.
C
AUTION
:
To ensure a proper connection, be sure to place the keyboard flex cables
securely into the zero insertion force connectors.
To avoid damage to the keyboard flex cables, do not allow them to fold
under the keyboard.
securely into the zero insertion force connectors.
To avoid damage to the keyboard flex cables, do not allow them to fold
under the keyboard.
Figure 30 - Keyboard Flex Cables
Figure 31 - Keyboard Flex Cable Placement