Panasonic UF-4100 ユーザーズマニュアル
57
B
asi
c O
p
er
at
io
ns
Receiving Documents
You can select one of the four modes as shown below.
NOTE
1 Depending on the model of the Telephone Answering Machine (TAM) that is connected, some
of the features may not be compatible with your fax machine operating in the TAM Interface
mode.
mode.
2 If you are using the "Distinctive Ring Service" provided by your local telephone company,
please note that the ring pattern for your fax number must match with the setting of Fax
Parameter No. 30 (DRD SERVICE). (See page 34)
If the setting does not match with the ring pattern, your machine will not receive a document
automatically and the telephone will continue to ring.
Furthermore, if your TAM does not support the "Distinctive Ring Detector" service, it may not
function properly in TAM Interface.
Parameter No. 30 (DRD SERVICE). (See page 34)
If the setting does not match with the ring pattern, your machine will not receive a document
automatically and the telephone will continue to ring.
Furthermore, if your TAM does not support the "Distinctive Ring Detector" service, it may not
function properly in TAM Interface.
Reception Modes
Conditions
Suggested Reception Mode
Settings
You normally receive
only voice calls.
only voice calls.
Telephone Mode
You can answer the incoming call via an External
Telephone (Optional). If you receive a fax calling
signal, simply press
Telephone (Optional). If you receive a fax calling
signal, simply press
START
to receive manually.
Fax Parameter No. 17 set to 1: Tel
You receive both voice
and fax calls.
and fax calls.
Fax / Tel Auto Switching Mode
Unit will answer the incoming call then distinguishes
whether it is voice or fax call. If it is a fax call, the unit will
receive automatically. If it is a voice call, the unit will
signal (ring) through the speaker for your attention.
(See page 59)
whether it is voice or fax call. If it is a fax call, the unit will
receive automatically. If it is a voice call, the unit will
signal (ring) through the speaker for your attention.
(See page 59)
Fax Parameter No. 17 set to 3:
Fax / Tel SW.
Fax / Tel SW.
You normally receive
fax calls only.
fax calls only.
Fax Mode
Unit will receive the document automatically. All
incoming calls (including a voice call) are
answered by the fax machine.
incoming calls (including a voice call) are
answered by the fax machine.
Fax Parameter No. 17 set to 2:
Fax
Fax
You receive both voice
and fax calls. And a
Telephone Answering
Machine (TAM) is
connected.
and fax calls. And a
Telephone Answering
Machine (TAM) is
connected.
TAM Interface Mode
The TAM answers the incoming call. During that
time, the unit also monitors whether it is a voice
call, the TAM continues to operate. If it is a fax call,
the unit will automatically switch the line to the Fax
and begin receiving document.
time, the unit also monitors whether it is a voice
call, the TAM continues to operate. If it is a fax call,
the unit will automatically switch the line to the Fax
and begin receiving document.
Fax Parameter No. 17 set to 4:
TAM I/F.
TAM I/F.