Panasonic UF-4100 ユーザーズマニュアル

ページ / 122
Receiving Documents
65
B
asi
c O
p
er
at
io
ns
If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically 
starts receiving documents into its image data memory. Stored documents are printed automatically after 
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
The printing mechanism of the UF-4100 is a Reverse Order Stacking construction.  The UF-4100 has a Print 
Collation Mode that stacks received documents in the correct order.  When the Print Collation Mode is 
enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking.  
The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT 
COLLATION set to “Valid”, and 2) enough remaining memory.  
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements 
is not met.  
NOTE
1 If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
2 If you wish to turn off the substitute reception function, change the setting of Fax Parameter 
No. 22 to "Invalid".  (See page 34)
Substitute Memory Reception
1
When the machine finishes the memory reception and 
there is no recording paper or toner, an Information Code 
appears on the display.
NO REC.PAPER 010
OUT OF TONER 041
2
Install the recording paper  (see page 17) or replace the 
toner cartridge  (see page 15).
The machine will automatically start printing the document 
stored in the memory.
* PRINTING *
Print Collation Mode
Sending Document Order
Stacking Document Order
3
2
1
Correct Order Stacking
(Collation Mode)
3
2
1
Reverse Order Stacking
(Non-Collation Mode)
1
2
3