HP (Hewlett-Packard) E0P69UAABA ユーザーズマニュアル
RTC battery
Description
Spare part number
RTC battery
449137-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
6.
Remove the hard drive compartment cover (see
).
To remove the RTC battery:
▲
Insert a screwdriver or similar small tool between the battery and the clip that secures it (1), pry
the battery up to disengage it from the socket, and then remove the battery (2).
the battery up to disengage it from the socket, and then remove the battery (2).
Reverse this procedure to install the RTC battery.
50
Chapter 4 Removal and replacement procedures