HP (Hewlett-Packard) E0P69UAABA ユーザーズマニュアル

This section describes removing the display assembly in its entirety and disassembling all the display
subcomponents.

If you only need to remove the display bezel, webcam/microphone module, or display panel, you do
not need to remove the entire display assembly from the computer. See 

 for more information about removing the display subcomponents

that do not require that you remove the entire display assembly from the computer.

35.6-cm (14.0-in), HD, LED, BrightView display panel

685101-001

35.6-cm (14.0-in), HD, LED, Anti-glare display panel

694746-001

Antennas (includes wireless antenna cables and transceivers; also includes Mylar screw covers)

Models may have either one or two antennas installed.

685076-001

Display bezel (includes Mylar screw covers)

685081-001

Display cable (includes display panel cable and webcam/microphone cable; also includes Mylar
screw covers)

685083-001

Display enclosure for use in charcoal (includes Mylar screw covers)

685756-001

Display enclosure for use in black models (includes Mylar screw covers)

713529-001

Hinge covers (includes Mylar screw covers)

685088-001

Hinges (includes Mylar screw covers)

685090-001

HP TrueVision HD webcam/microphone module

694747-001

HP VGA webcam/microphone module

685112-001

Rubber display bumpers

685102-001

Before removing the display assembly in its entirety, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

Remove the battery (see 

Disconnect the WLAN module antenna cables from the WLAN module (see 

Remove the following components:

●

Hard drive (see 

●

Keyboard (see 

)

●

Top cover (see 

Component replacement procedures

71