HP (Hewlett-Packard) FN041UAABA ユーザーズマニュアル
RJ-11 connector cable
NOTE:
The RJ-11 connector cable is included in the Cables Kit, spare part number 452198-001.
Before removing the RJ-11 connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the following components:
a.
b.
Optical drive (see
)
c.
Keyboard (see
)
d.
Switch cover (see
e.
Display assembly (see
)
f.
Top cover (see
g.
)
h.
Heat sink (see
)
i.
Modem module (see
j.
System board (see
)
Remove the RJ-11 connector cable:
1.
Position the computer right-side up, with the front toward you.
2.
Remove the RJ-11 connector (1) from the clip built into the base enclosure.
Component replacement procedures
93