HP (Hewlett-Packard) 14-3010nr ユーザーズマニュアル

Power-on password*

●

Protects access to the computer contents.

●

After this password is set, it must be entered each time
you turn on or restart the computer, or exit Hibernation.

If you forget your power-on password, you

cannot turn on or restart the computer, or exit Hibernation.

The administrator password can be used in place of

the power-on password.

A power-on password is not displayed as it is set,

entered, changed, or deleted.

*For details about each of these passwords, refer to the following topics.

To set, change, or delete this password, follow these steps:

Open Setup Utility (BIOS) by turning on or restarting the computer. While the “Press the ESC
key for Startup Menu” message is displayed in the lower-left corner of the screen, press 

esc

.

When the Startup Menu is displayed, press 

f10

.

Use the arrow keys to select Security > Administrator Password, and then press 

enter

.

●

To set an administrator password, type your password in the Enter New Password and
Confirm New Password fields, and then press 

enter

.

●

To change an administrator password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press 

enter

.

●

To delete an administrator password, type your current password in the Enter Password
field, and then press 

enter

 4 times.

To save your changes and exit Setup Utility (BIOS), use the arrow keys to select Exit > Exit
Saving Changes.

Your changes take effect when the computer restarts.

At the Enter Password prompt, type your administrator password, and then press 

enter

. After 3

unsuccessful attempts to enter the administrator password, you must restart the computer and try
again.

Using passwords

43