Transcend Information TS-USP3 ユーザーズマニュアル

•

 Precomp:  Write precompensation cylinder

•

 Landing Zone:  Landing zone

•

 Sector:  Number of sectors

•     

Select the correct type of diskette drive(s) installed in the computer.

- None:  No diskette drive installed

- 360K, 5.25 in.:  5-1/4-inch standard drive; 360 kilobyte capacity

- 1.2M,  5.25 in.:  5-1/4-inch high-density drive; 1.2 megabyte capacity

- 720K,   3.5 in.:  3-1/2-inch double-sided drive; 720 kilobyte capacity

- 1.44M,  3.5 in.:  3-1/2-inch double-sided drive; 1.44 megabyte capacity

- 2.88M,  3.5 in.:  3-1/2-inch double-sided drive; 2.88 megabyte capacity

•     

Supports some particular Japanese floppy drives (3-1/2-inch drive with 1.2 megabyte capacity).

•     

Select the type of primary video subsystem in your computer.  The BIOS will detect the correct

video type automatically.  The BIOS supports a secondary video subsystem, but do not select

it in this Setup.

- EGA/VGA:  Enhanced Graphics Adapter/Video Graphics Array.  For EGA, VGA, SEGA,

  SVGA or PGA monitor adapters.

- CGA 40:  Color Graphics Adapter, powers up in 40-column mode.

- CGA 80:  Color Graphics Adapter, powers up in 80-column mode.

- MONO:  Monochrome adapter, including high resolution.

•     

During POST, the computer stops if the BIOS detects a hardware error.  You can set the BIOS

to ignore certain errors during POST and continue the boot-up process.  The followings are

the selections:

- All Errors:  If the BIOS detects any non-fatal errors, POST stops and prompts you to

                  take corrective action.

- No Errors:  POST does not stop for any error.

- All, But Keyboard:  If the BIOS detects any non-fatal errors except keyboard, POST

  stops and prompts you to take corrective action.