Transcend Information TS-USP3 ユーザーズマニュアル

•

 

After the selected period of system inactivity (1 minute to 1 hour), all devices except the

CPU will be shut down.

•

After the selected period of system inactivity (1 to 15 minutes), the hard disk drive powers

down while all other devices remain active.  This feature doesn’t effect SCSI hard drives.

•

When set to “Instant-off”, the ATX switch can be used as a normal system Power Off button.

When set to “Delay 4 seconds”, you need to press the Power-Off button down for more than

4 seconds if you want to Power Off the system.

•

Select “Enabled” if you want to Power On your system when a PCI or LAN event occurs.

•

Select “Enabled” to Power On your system when the external Modem receives a call.

•

        Select the CPU Thermal-Throttling rate.  If BIOS detects that the CPU temperature is too

      high, it will slow down the CPU’s speed according to this field.  The choices: “87.5%”,

    “75.0%”, “62.5%”, “50.0%”, “37.5%”, “25.0%” and “12.5%”.

•

Select “Enabled” if you want to power up your system at a certain time on the same day every

month or at a certain time every day.

•

Set the Date and Time to Power On the system.  Activated only when the “Resume by

•

When “Enabled”, an event occurring on any device listed below restarts the global timer from

Standby Mode, and Powers On the system.