Seagate Enterprise Value ユーザーズマニュアル

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-
mounting holes. Refer to 

 for drive mounting dimensions. Follow these important mounting precautions when

mounting the drive:

• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.

• Use only 6-32 UNC mounting screws.

• The screws should be inserted no more than 0.150 inch (3.81mm) into the bottom or side mounting holes.

• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

Weight: (maximum)

4TB models

606g (1.33 lb)

www.sffcommittee.org

PCBA may not be representative of the actual PCBA on drive.