Seagate ST200FX0002 ユーザーズマニュアル
6
Pulsar XT.2 SAS Product Manual, Rev. B
4.0
General description
Pulsar XT.2 drives provide high performance, high capacity data storage for a variety of systems with a Serial
Attached SCSI (SAS) interface. The Serial Attached SCSI interface is designed to meet next-generation com-
puting demands for performance, scalability, flexibility and high-density storage requirements.
Attached SCSI (SAS) interface. The Serial Attached SCSI interface is designed to meet next-generation com-
puting demands for performance, scalability, flexibility and high-density storage requirements.
Pulsar XT.2 drives are random access storage devices designed to support the Serial Attached SCSI Protocol
as described in the ANSI specifications, this document, and the SAS Interface Manual (part number
100293071) which describes the general interface characteristics of this drive. Pulsar XT.2 drives are classified
as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI-1 standard. The
SAS connectors, cables and electrical interface are compatible with Serial ATA (SATA), giving future users the
choice of populating their systems with either SAS or SATA drives. This allows users to continue to leverage
existing investment in SCSI while gaining a 6Gb/s serial data transfer rate.
as described in the ANSI specifications, this document, and the SAS Interface Manual (part number
100293071) which describes the general interface characteristics of this drive. Pulsar XT.2 drives are classified
as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI-1 standard. The
SAS connectors, cables and electrical interface are compatible with Serial ATA (SATA), giving future users the
choice of populating their systems with either SAS or SATA drives. This allows users to continue to leverage
existing investment in SCSI while gaining a 6Gb/s serial data transfer rate.
The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security
of Data at Rest” based on the standards defined by the Trusted Computing Group (see www.trustedcomputing-
group.org).
of Data at Rest” based on the standards defined by the Trusted Computing Group (see www.trustedcomputing-
group.org).
Note.
Never disassemble and do not attempt to service items in the enclosure. The drive does not contain
user-replaceable parts. Opening for any reason voids the drive warranty.
user-replaceable parts. Opening for any reason voids the drive warranty.
4.1
Standard features
Pulsar XT.2 SAS drives have the following standard features:
• 1.5 / 3.0 / 6.0
Gb Serial Attached SCSI (SAS) interface
• Integrated dual port SAS controller supporting the SCSI protocol
• Support for SAS expanders and fanout adapters
• Firmware downloadable using the SAS interface
• 128 - deep task set (queue)
• Supports up to 32 initiators
• Jumperless configuration
• User-selectable logical block size (512, 520, 524, 528, 4096, 4160, 4192, or 4224 bytes per logical block)
• Industry standard SFF 2.5-inch dimensions
• ECC maximum burst correction length of 90 bits
• No preventive maintenance or adjustments required
• Self diagnostics performed when power is applied to the drive
• Vertical, horizontal, or top down mounting
• Drive Self Test (DST)
• Background Media Scan (BMS)
• Parallel flash access channels
• Power loss data protection
• Thin Provisioning with Block Unmap Support
• Silent operation
• Lifetime Endurance Management
• Support for SAS expanders and fanout adapters
• Firmware downloadable using the SAS interface
• 128 - deep task set (queue)
• Supports up to 32 initiators
• Jumperless configuration
• User-selectable logical block size (512, 520, 524, 528, 4096, 4160, 4192, or 4224 bytes per logical block)
• Industry standard SFF 2.5-inch dimensions
• ECC maximum burst correction length of 90 bits
• No preventive maintenance or adjustments required
• Self diagnostics performed when power is applied to the drive
• Vertical, horizontal, or top down mounting
• Drive Self Test (DST)
• Background Media Scan (BMS)
• Parallel flash access channels
• Power loss data protection
• Thin Provisioning with Block Unmap Support
• Silent operation
• Lifetime Endurance Management
Pulsar XT.2 SAS Self-Encrypting Drive models have the following additional features: