Marantz R3001 ユーザーズマニュアル

¡7

¡6

f

s

a

¡5

g

j l ¡1

¡3

d

h

¡0 ¡2

¡4

k

¡8

a  DISP (Display Off) indicator

This indicator is illuminated when the SR3001 is in 
the display off condition.

s  SLEEP timer indicator

This indicator is illuminated when the sleep timer 
function is active.

d  AUTO SURR (Auto Surround 

This indicator is illuminated to show that the AUTO 
SURROUND mode is in use.

f TUNER’s 

:  This indicator illuminates when the 

tuner’s Auto mode is in use.

:  This indicator illuminates when 

a station is being received with 
suffi cient signal strength to provide 
acceptable listening quality.

 ST(Stereo) :  This indicator illuminates when an 

FM station is being tuned into stereo 
condition.

g  DTS-ES mode indicators 

These indicators will illuminate to show the DTS-ES 
decoding mode (Discrete 6.1 or Matrix 6.1).

h  V (video)-OFF mode indicator

This indicator is illuminated when the Video-OFF 
function is active.

¡4  SIGNAL FORMAT indicators

2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24, 
PCM
When the selected input is a digital source, some 
of these indicators will be illuminated to display the 
specifi c type of signal in use.

¡5  ENCODED CHANNEL STATUS 

These indicators display the channels that are 
encoded with a digital
input signal. If the selected digital input signal is 
Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, 
“SR” and “LFE” will be illuminated. If the digital input 
signal is 2 channel PCM-audio, “L” and “R” will be 
displayed. 
If Dolby Digital 5.1ch signal with Surround EX fl ag or 
DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S” , “SR” 
and “LFE” will be illuminated.

¡6  Main Information Display

This display shows messages relating to the status, 
input source, surround mode, tuner, volume level or 
other aspects of unit’s operation.

¡7  DIRECT (Pure direct) indicator

This indicator is illuminated when the SR3001 is in 
the PURE DIRECT mode.

¡8 HDCD 

When HDCD signal is decoded from digital input, this 
indicator will light up.

j  NIGHT mode indicator

This indicator is illuminated when the SR3001 is in 
the Night mode, which reduces the dynamic range of 
digital program material at low volume levels.

k  SPKR (Speaker) B  indicator

This indicator is illuminated when the S(Surround) 
speaker B system is active.

l PEAK 

This indicator is a monitor for an analog audio input 
signal. If the selected analog audio input signal is 
greater than the capable level of internal processing, 
this will illuminate. If this happens, you should press the 
ATT button on the front panel or the remote.

¡0  EQ mode indicator

This indicator is illuminated when the HT-EQ function 
is active.

¡1  ATT (Attenuation) indicator

This indicator is illuminated when the attenuation 
function is active.

¡2  DIGITAL Input Indicator

This indicator lights when a digital input has been 
selected.

¡3  ANALOG input indicator 

This indicator is illuminated when an analog input 
source has been selected.

@2  HEADPHONE jack for stereo 

This jack may be used to listen to the SR3001’s 
output through a pair of headphones. Be certain 
that the headphones have a standard 1 / 4" stereo 
phono plug. Note that the main room speakers will 
automatically be turned off when the headphone 
jack is in use.

• When using headphones, the surround mode 

will change to STEREO and TruSurround (TS) 
headphones by SURROUND MODE button.

•  The surround mode returns to the previous setting 

as soon as the headphone plug is removed from the 
jack.