Canon B820 ユーザーズマニュアル
8-2
USER SETTINGS
Name
Description
Settings
DATE & TIME
Set the date and time (24-hour clock) using the numeric
buttons.
buttons.
–
UNIT TELEPHONE #
Enter your fax number using the numeric buttons.
–
UNIT NAME
This is the name that appears at the top of each fax page you
send (see p. 2-8).
send (see p. 2-8).
–
TX TERMINAL ID
This option sets the parameters for the identification header
that appears on every page you send.
that appears on every page you send.
ON/OFF
TTI POSITION
Select the position of the TTI.
INSIDE IMAGE/
OUTSIDE IMAGE
FAX/TEL
TELEPHONE # MARK
Select the icon for the fax number.
SCAN CONTRAST
Set the density of the reproduction.
STANDARD/
DARKER/ LIGHTER
OFFHOOK ALARM
Enable/disable the off hook alarm. The alarm alerts you that
the handset is not seated properly in its cradle.
the handset is not seated properly in its cradle.
ON/OFF
VOLUME CONTROL
Set the volume of the fax sounds.
–
LINE MONITOR VOL
Set the volume of the line monitor (sound during dialing).
0 (off)/1/2/3
ALARM VOLUME
Set the volume of the error alarm sound.
0 (off)/1/2/3
KEYPAD VOLUME
Set the volume of the keypad.
0 (off)/1/2/3
RX CALL LEVEL
Set the ring tone.
STANDARD/HIGH
TEL LINE TYPE
Set the dialing method the fax uses to match the type of phone
line you have.
line you have.
TOUCH TONE/
ROTARY PULSE
R-KEY SETTING
Set the type of connection for your fax.
PSTN/PBX
PSTN
Your fax is connected to an outside line.
–
PBX
ACCESS TYPE: Set the access line type for the PBX.
PREFIX/HOOKING
ACCESS NUMBER: If you select PREFIX, you can enter an
outside line number of up to 19 digits.
outside line number of up to 19 digits.
–
AUTO VOICE DIAL
Enable/disable automatic dialing for UCanTalk.
ON/OFF