Panasonic BT-LH1800P ユーザーズマニュアル

ページ / 28
8
With INPUT SELECT selected, the following menu will ap-
pear.
LINE A, B/S-VIDEO
Used to set the input format of LINE A, B/S-VIDEO.
Set-value (underlined is default value)
AUTO
  NTSC
PAL
NON-STANDARD
Used to display a signal not in conformity with the broadcast-
ing standard in selection of LINE A, LINE B, S-VIDEO.
Set-value (underlined is default value)
OFF
  ON
REMOTE CONFIG
[REMOTE CONFIG] 
>GPI1                 UNDEF
 GPI2                 UNDEF
 GPI3                 UNDEF
 GPI4                 UNDEF
 GPI5                 UNDEF
 GPI6                 UNDEF
 GPI7                 UNDEF
 GPI8                 UNDEF
    
                
REMOTE CONFIG menu
INPUT SELECT
[INPUT SELECT] 
>[LINE A,B/S-VIDEO]    AUTO
 NON-STANDARD           OFF
               
                
INPUT SELECT menu
[INPUT SELECT] 
>[LINE A,B/S-VIDEO]    AUTO
 NON-STANDARD           OFF
 [HD-SDI]              AUTO
  
                
INPUT SELECT HD-SDI menu
With REMOTE CONFIG selected, the following menu will
appear.
GPI1–GPI8
Used to set the pin assignment of REMOTE control terminal.
The settable items are same for each terminal.
For each function of set-value, refer to the “REMOTE specifi-
cations.”
Set-value (underlined is default value)
UNDEF
MARKER1 ON/OFF
MARKER2 ON/OFF
MARKER HALF*
1)
MARKER  BLACK*
1)
INPUT SEL A
INPUT SEL B
INPUT SEL S
INPUT SEL OP
SD ASPECT*
2)
HD ZOOM*
3)
BACKLIGHT OFF
*
1)
MARKER HALF and MARKER BLACK are effective only when
MARKER1 and MARKER2 are used with 4:3/13:9/14:9 displayed.
*
2)
When using SD ASPECT, set SD ASPECT to REMOTE by VIDEO
CONFIG menu.
*
3)
When using HD ZOOM, set HD ZOOM to REMOTE by VIDEO
CONFIG menu.  HD ZOOM is effective only in case of 1080I, 1035I,
720P signal input.
HD-SDI
Used to set the input format of HD-SDI.
Set-value (underlined is default value)
AUTO
1080/60I*
1)
1080/50I
1080/24psF*
2)
1035/60I*
1)
720/60P*
3)
*
1)
1080/60I and 1035/60I are different with respect to the display
size and the matrix used.
Select 1080/60I and 1035/60I even in case of 1080/59.94I and
1035/59.94I signal input.
The status will be correctly displayed on the screen.
*
2)
Select 1080/24psF even in case of 1080/23.98psF signal input.
The status will be correctly displayed on the screen.
*
3)
Select 720/60P even in case of 720/59.94P signal input.
The status will be correctly displayed on the screen.
Menu for option unit is further added for each
type of option unit fitted on the rear panel.
HD SDI input unit installed [BT-YA300P]
How To Use On Screen Menu