Louisville Tin and Stove VFM303 ユーザーズマニュアル
BLOWER INSTRUCTIONS
INSTALLING THE VFB BLOWER
STEP 1. Remove blower assembly from shipping carton.
STEP 2. Insert blower assembly into upper back of heater (See Figure 8).
STEP 3. Secure blower to heater using three #8 screws (provided) through holes pre-punched in heater back.
STEP 4. Locate mounting holes for switchbox (See Figure 8).
STEP 5. Secure switchbox to heater using two #8 screws (provided).
STEP 6. Plug power cord into 115 volt three-prong grounded receptacle.
STEP 2. Insert blower assembly into upper back of heater (See Figure 8).
STEP 3. Secure blower to heater using three #8 screws (provided) through holes pre-punched in heater back.
STEP 4. Locate mounting holes for switchbox (See Figure 8).
STEP 5. Secure switchbox to heater using two #8 screws (provided).
STEP 6. Plug power cord into 115 volt three-prong grounded receptacle.
CAUTION:
Always unplug power cord before servicing or cleaning heater. This appliance is equipped with a three-
prong (grounding) plug for your protection against shock hazard and should be plugged directly into a
properly grounded three-prong receptacle.
prong (grounding) plug for your protection against shock hazard and should be plugged directly into a
properly grounded three-prong receptacle.
Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper
and dangerous operation. Verify proper operation after servicing.
and dangerous operation. Verify proper operation after servicing.
FIGURE 8
Switchbox
Blower Assembly
Blower
Motor
Motor
Black
White
Fan
Switch
Switch
White
(or ribbed)
Green
Black
WIRING DIAGRAM / VFB BLOWER
Page 17
If any of the original wire supplied
with the appliance must be re-
placed, it must be replaced with a
wire of at least a 105
with the appliance must be re-
placed, it must be replaced with a
wire of at least a 105
/C tempera-
ture rating.