Lopi 864TRV ユーザーズマニュアル
6
Operation
© Travis Industries
4050812
100-01168_001
Before You Begin
•
Read this entire manual before you use your new fireplace (especially the section "Safety
Precautions" on pages 4 & 5). Failure to follow the instructions may result in property damage,
bodily injury, or even death.
Precautions" on pages 4 & 5). Failure to follow the instructions may result in property damage,
bodily injury, or even death.
Location of Controls
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
Lift the control cover up and swing it
forward to access the controls.
Pilot Igniter
ON/OFF Switch
Flame Adjust Knob
Gas Control Knob
An instruction card for operating
the fireplace is attached to the
inside of the fireplace here.
inside of the fireplace here.
Replace it for easy reference.
The Pilot Flame can be
found under the right side log
found under the right side log
.
Comfort Control
Gas Control Valve
Optional Blower Control
Optional Accent Light
Optional Accent Light
Pilot Igniter
The pilot igniter is used only to start the pilot. When pressed, it sends an
electrical charge to the pilot assembly. This creates a blue spark
directly next to the pilot, igniting the pilot flame.
electrical charge to the pilot assembly. This creates a blue spark
directly next to the pilot, igniting the pilot flame.
On/Off Switch
This control is used to turn the fireplace burners on and off.
Gas Control Knob
This knob is used to control gas to the fireplace and for starting the pilot.
There are three positions, ON, OFF, & PILOT. The pointer to the left of
the knob indicates the position this knob is in.
There are three positions, ON, OFF, & PILOT. The pointer to the left of
the knob indicates the position this knob is in.
Flame Adjust Knob
This knob controls the flame height from low ("LO") to high ("HI"). The
pointer above the knob points to the position this knob is in.
pointer above the knob points to the position this knob is in.
Comfort Control
This lever turns the rear burner on and off.
NOTE: THIS IS NOT A SHUTOFF VALVE.
NOTE: THIS IS NOT A SHUTOFF VALVE.
Optional Blower Control
This knob controls the speed of the optional internal convection blower
that pushes heated air into the room.
that pushes heated air into the room.
Optional Accent Light
This knob controls the optional accent lights located behind the logs.