Lennox Hearth SDDV-40 ユーザーズマニュアル

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

-  INSTALL DOORFRAME

6. Place the doorframe bracket in the locked position as shown in Figure 7.

4. For EDV, EDVST & EBVST models, reinstall modesty panel, ensuring all 

wires are securely connected.

5. Install Doorframe (see  Figure 6) -  Remove the arched doorframe 

from packaging. Position the top of the doorframe above the top of the 
glass doorframe (centered and approximately 1” above the top of the 
glass doorframe).  Slide down so that the hooks catch on the back of 
the doorframe slide between the sides of the glass door and the corner 
posts engaging into existing slots on fi replace.

7. Remove the screen doors from packaging. Install them by aligning 

hinge pins on the doors with the hinge holes on the doorframe and 
slide down (see instructions in Figure 8). Ensure the hinge pins are 
fully seated onto the shoulders of the hinge holes.

Step 1 - Remove the 
two #8 screws from 
the  bracket screw 
cover on both sides.

Step 3 - Install the Firebox Bottom Cover Panel (#5 in Figure 1) using the 
existing #10 screws.  The bottom two holes on the cover panel align to cor-
responding two holes on fi rebox bottom.