Crimestopper Security Products RS801 ユーザーズマニュアル

ページ / 4
 
 
 
 
 
 
 
 
 
RS800ER / RS801 
REMOTE ENGINE STARTING SYSTEM 
OPERATING INSTRUCTIONS 
 
CONGRATULATIONS on your choice of a CoolStart™ Remote Engine Starter by Crimestopper Security Products 
Inc. 
 This booklet contains the information necessary for using & maintaining your remote start system.  If any 
questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800) 998-6880. 
 
OPERATION CAUTIONS & WARNINGS 
 
CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this 
equipment.  This system is designed to be professionally installed onto a vehicle in which all items, such as parking brake and all 
associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect 
working condition.
 
 
DO NOT install this Remote Engine Starting System on MANUAL TRANSMISSION vehicles. If accidentally left in gear the 
vehicle could become a self-propelled threat to life and property.
 
 
IT IS ABSOLUTELY THE OWNER’S SOLE RESPONSIBILITY TO: A) Understand the operation of this system and its safety 
features.  B) Check for proper operation of these safety features prior to accepting delivery of the vehicle from the installation facility.  
C) Check and maintain the condition of the vehicle and all items relative to the proper operation of this system and its safety features. 
 D) Always leave the doors and windows closed and locked to protect against accident and theft. 
 
DO NOT remote start the vehicle in a closed garage.  Make sure that the garage door is open or there is adequate ventilation.  
Failure to observe this rule could result in injury or death from poisonous Carbon Monoxide fumes. 
 
IT IS ABSOLUTELY THE OWNERS SOLE RESPONSIBILITY TO: make certain the vehicle PARKING BRAKE is properly adjusted 
and will hold the vehicle securely in all parking conditions, and to periodically check and maintain proper adjustment. 
 
 
 
 
 
 
 
This device complies with FCC Rules part 15. Operation is subject to the following 
two conditions: 1) This device may not cause interference, and (2) this device must 
accept any interference that may be received, including interference that may 
cause undesired operation.  The manufacturer is not responsible for any radio or 
TV interference caused by unauthorized modification to this equipment. Such 
modification could void the user's authority to operate the equipment.