Panasonic AG-3DP1G ユーザーズマニュアル
17
Chapter 2
P
ar
ts
and
their
their
Functions
Audio (input) Function Section
1
4
8
2
7
3
6
5
1 MIC IN (front microphone input) +48V jack (XLR, 5-
pin)
Connect a microphone (optional accessory) to this jack.
A phantom-powered microphone may be connected.
To use a phantom-powered microphone, set the menu
option F.MIC POWER to ON in the AUDIO SETUP
screen.
For details, refer to [Preparing for Audio Input]
(page 87).
Connect a microphone (optional accessory) to this jack.
A phantom-powered microphone may be connected.
To use a phantom-powered microphone, set the menu
option F.MIC POWER to ON in the AUDIO SETUP
screen.
For details, refer to [Preparing for Audio Input]
(page 87).
2 AUDIO LEVEL CH1/CH2 (audio channel 1/2
recording level adjustment) controls
With the AUDIO SELECT CH1/CH2 switch positioned
to MAN, these controls can be used to adjust the
recording levels for audio channels 1 and 2.
Note that the controls are designed to be locked. For
adjustment, each control must be depressed while
turning.
With the AUDIO SELECT CH1/CH2 switch positioned
to MAN, these controls can be used to adjust the
recording levels for audio channels 1 and 2.
Note that the controls are designed to be locked. For
adjustment, each control must be depressed while
turning.
3 AUDIO SELECT CH1/CH2 (audio channel 1/2
automatic/manual level adjustment selector) switch
Use this switch to select recording level control mode
for audio channels 1 and 2.
AUTO:
Use this switch to select recording level control mode
for audio channels 1 and 2.
AUTO:
Recording level automatically controlled.
MAN:
Recording level manually controlled.
For details, refer to [Adjusting Recording Levels]
(page 51).
(page 51).
4 AUDIO IN (audio input selector) switch
Use this switch to select signals recorded through
audio channels 1 – 4.
FRONT:
audio channels 1 – 4.
FRONT:
Records signals from a microphone
connected to the MIC IN jack.
W.L.(WIRELESS):
Records signals from a wireless receiver.
REAR:
Records signals from audio devices or
microphones connected to the AUDIO IN
CH1/CH2 connectors.
CH1/CH2 connectors.
NOTE
To record 2-channel wireless input, switch both CH1 and
CH2 to W.L. position and set the menu option WIRELESS
TYPE in the AUDIO SETUP screen to DUAL.
CH2 to W.L. position and set the menu option WIRELESS
TYPE in the AUDIO SETUP screen to DUAL.
5 AUDIO IN CH1/CH2 (audio channel 1/2) connectors
(XLR, 3-pin)
Audio devices or microphones may be connected here.
Audio devices or microphones may be connected here.
For details, refer to [When Using Audio Devices]
(page 88).
6 LINE/MIC (line input/mic input) selector switch and
+48V switch
Use to select audio signals to be input to the AUDIO IN
Use to select audio signals to be input to the AUDIO IN
CH1/CH2 connectors.
LINE:
LINE:
Line input for audio signals input from an
audio device
MIC:
Audio signal input from a microphone input
The +48V switch turns the internal power supply to a
phantom microphone on/off.
+ 48V:
+ 48V:
Supplies power to the microphone.
OFF:
Does not supply power the microphone.
NOTE
Power is supplied to the microphone when the menu
option R.MIC POWER in the AUDIO SETUP screen is set to
ON.
option R.MIC POWER in the AUDIO SETUP screen is set to
ON.
7 F. AUDIO LEVEL (front audio recording level
adjustment) control
This control adjusts the recording level of audio
This control adjusts the recording level of audio
channels 1 and 2.
With the AUDIO SELECT CH1/CH2 switch positioned to
MAN, this control can be used to adjust the recording
levels for audio channels 1 and 2.
Use the menu options FRONT VR CH1 and FRONT VR
CH2 in the AUDIO SETUP screen to select the input
connector this control will be used for.
8 Wireless slot
A Unislot wireless receiver (optional accessory) may be
attached here.