Philips ESXMIM プリント

Applicable models  8FF3WMI 

1.01 

September 19, 2008 

 

 

Important notice before updating 
The firmware upgrade process will remove all photos currently stored on PhotoFrame. 
Please make sure all photos on PhotoFrame are properly backed up before updating. 

 

 

Please follow the steps below to upgrade the PhotoFrame firmware. 

Format SD (Secure Digital) card 

 

 

 

 

 

Copy all files from the ‘

Firmware

’ folder into the root folder of the SD card

(The root folder is the ‘highest’ folder in hierarchy, for example 

F:\

) 

Make sure PhotoFrame is powered Off

Insert SD into PhotoFrame with the new firmware into the PhotoFrame

Push the Power button to power on the PhotoFrame

The firmware upgrade will start automatically

 

Warning:  Upgrade takes about 1 minute.  
During the upgrade do not disconnect power, remove the memory or make new 

connections. Otherwise this may harm your PhotoFrame. 

 

When "

Please reboot system!

" shows, firmware upgrade has finished 

 

 

 

Remove the memory from the PhotoFrame

Power Off the PhotoFrame and Power On afterwards by pushing the Power button

The upgrade has completed

You can check the new firmware version via 

Setup

 → 

Status

 → 

Firmware

.