KYOCERA TASKalfa4550ci ユーザーズマニュアル
Installation
Click Finish, and retry the installation. If the same message appears again,
contact your system administrator.
contact your system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
computer.
Custom Mode applies to driver installation for a USB or network connection.
The installation wizard can discover printers that are turned on, and connected
by USB and network cable, or you can manually select the driver from drivers
that are available. You can specify the printer port, fonts, and the utilities you
want to install.
The installation wizard can discover printers that are turned on, and connected
by USB and network cable, or you can manually select the driver from drivers
that are available. You can specify the printer port, fonts, and the utilities you
want to install.
Printer drivers that ship with Windows operating systems are called minidrivers.
The minidriver is available separately for PCL and KPDL and provides basic
support for your printer.
The minidriver is available separately for PCL and KPDL and provides basic
support for your printer.
The KX XPS DRIVER is only available for printing systems used with Windows
7 and Windows Vista. The XPS driver is discussed in the Device Settings
chapter. Minidriver functionality is not documented in this user guide.
7 and Windows Vista. The XPS driver is discussed in the Device Settings
chapter. Minidriver functionality is not documented in this user guide.
This section describes the custom installation procedure of the driver software
in Windows operating systems using a network connection.
in Windows operating systems using a network connection.
1
Ensure that your printer and computer are connected to a network.
2
On the Installation Method page, select Custom Mode.
3
The Discover Printing System page opens searching for your printing system.
The Discover button is automatically selected. A list of models appears. Click
Next.
The Discover button is automatically selected. A list of models appears. Click
Next.
If Discover does not find your printing system, a message appears. Remove
and reinsert the network cable, and ensure it is connected properly. Click
Refresh to retry the discovery. If the system still cannot find your printing
system, contact your system administrator.
and reinsert the network cable, and ensure it is connected properly. Click
Refresh to retry the discovery. If the system still cannot find your printing
system, contact your system administrator.
4
On the Custom Installation page, select the driver and software packages you
want to install from the Driver and Utility tabs, and clear those not intended for
installation. Click Next.
want to install from the Driver and Utility tabs, and clear those not intended for
installation. Click Next.
If you only select software packages from the Utility tab, you will skip to the
Confirm Settings page.
Confirm Settings page.
5
On the Printer Settings page, you can assign a name for your printing system.
You can also choose to share this printer with others or set this printer as the
default printer. Make your selections, and then click Next.
You can also choose to share this printer with others or set this printer as the
default printer. Make your selections, and then click Next.
6
On the Confirm Settings page, click Install if the settings are correct. Click
Back to correct the settings.
Back to correct the settings.
Note: If the Hardware Installation warning dialog box appears, click
Continue.
Continue.
User Guide
1-4