Allied International GX3300C ユーザーズマニュアル
GX3300 Technical Manual
Page 23
GigE Sample Viewer and Filter Driver
o
Download GigE Sample Viewer from
www.alliedvisiontec.com
. This will install the
Sample Viewer application program, drivers, and optionally the AVT/Prosilica Filter
Driver. The Filter Driver will improve CPU performance and is recommended.
Driver. The Filter Driver will improve CPU performance and is recommended.
o
Plug in the GX camera Ethernet cable(s) and power. Verify that the Green LED is a
solid green. Run Sample Viewer. It will take a few seconds for the camera to be
recognized, especially if your camera is in DHCP mode. If the camera does not
appear after one minute, see the Trouble Shooting section of this document.
recognized, especially if your camera is in DHCP mode. If the camera does not
appear after one minute, see the Trouble Shooting section of this document.
o
In Sample Viewer, select the wrench icon to change camera settings. See the
Camera Controls Addendum for description of each setting. Select the eye icon to
stream images. If the camera is not imaging, see the Trouble Shooting section of
this document.
stream images. If the camera is not imaging, see the Trouble Shooting section of
this document.
Figure 1. GigE Viewer application window.