Panasonic DMCFX01W ユーザーズマニュアル

ページ / 116
Preparation
12
VQT0V86
Charging the Battery 
with the Charger
The battery is not charged when the 
camera is shipped. Charge the battery 
before use.
1 Attach the battery with attention 
to the direction of the battery.
2 Connect the charger to the 
electrical outlet.
• Charging starts when the [CHARGE] 
indicator 
A lights green.
• Charging is complete when the 
[CHARGE] indicator 
A turns off (after 
about 130 minutes).
3 Detach the battery after charging 
is complete.
• After charging is completed, be sure to 
disconnect the charger from the electrical 
outlet.
• The battery becomes warm after using it 
and during and after charging. The 
camera also becomes warm during use. 
This is not a malfunction.
• The battery will be exhausted if left for a long 
period of time after being charged. 
Recharge the battery when it is exhausted.
• Use the dedicated charger and battery.
• Charge the battery with the charger 
indoors.
• Do not disassemble or modify the 
charger.
About the Battery 
(charging/number of recordable 
pictures)
∫ Battery indication
The remaining battery power appears on 
the screen. [It does not appear when you 
use the camera with the AC adaptor 
(DMW-AC5; optional) connected .]
• The battery indication turns red and 
blinks. (The status indicator blinks when 
the LCD monitor turns off.) Recharge the 
battery or replace it with fully charged 
battery.
∫ The battery life
The number of recordable pictures (By 
CIPA standard in normal picture mode)
Recording conditions by CIPA standard
• Temperature: 23 °C (73.4 °F)/
Humidity: 50% when LCD monitor is on.
¢
• Using the supplied SD Memory Card 
(16 MB).
• Using the supplied battery.
• Starting recording 30 seconds after the 
camera is turned on. (When the optical 
image stabilizer function is set to [MODE1].)
Number of 
recordable pictures
Approx. 320 pictures 
(Approx. 160 min)
VQT0V86ENG.book  12 ページ  2006年1月30日 月曜日 午前9時46分