Panasonic DMCFX01W ユーザーズマニュアル
Others
95
VQT0V86
• In [HIGH SENS.] (P52) in scene mode,
the resolution of the recorded picture
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
7: Motion picture recording stops in the
middle.
• Are you using a MultiMediaCard?
• Are you using a MultiMediaCard?
– This unit does not support
MultiMediaCards.
• When you set the picture quality to
[30fpsVGA] or [30fps16:9], we
recommend using a high speed SD
Memory Card with “10MB/s” or greater
displayed on the package.
recommend using a high speed SD
Memory Card with “10MB/s” or greater
displayed on the package.
• Depending on the type of SD Memory
Card, recording may stop in the middle.
∫ LCD monitor
1: The LCD monitor sometimes turns off
1: The LCD monitor sometimes turns off
although the camera is turned on.
• Have you set economy mode? (P18)
• Have you set economy mode? (P18)
– In economy mode, the LCD monitor
turns off while the flash is charged.
2: The LCD monitor becomes darker or
brighter for a moment.
• This phenomenon appears when you
• This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
the aperture value and does not affect
the recorded pictures.
3: The LCD monitor flickers indoors.
• The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
indoors under fluorescent light.
This is not a malfunction.
4: The LCD monitor is too bright or dark.
• Adjust the brightness of the screen.
(P18)
• Is the power LCD function or high angle
mode activated?
5: Black, red, blue and green dots
appear on the LCD monitor.
• These pixels do not affect the recorded
• These pixels do not affect the recorded
pictures.
This is not a malfunction.
This is not a malfunction.
6: Noise appears on the LCD monitor.
• In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
monitor.
This does not affect the pictures you are
recording.
7: A vertical line appears on the LCD
monitor.
• This is a phenomenon called smear. It
• This is a phenomenon called smear. It
is a characteristic of CCD and appears
when the subject has a bright part.
Uneven colors may also appear around
the smear. This is not a malfunction. It
is recorded in motion pictures but is not
recorded on still pictures.
when the subject has a bright part.
Uneven colors may also appear around
the smear. This is not a malfunction. It
is recorded in motion pictures but is not
recorded on still pictures.
∫ Flash
1: The flash is not activated.
1: The flash is not activated.
• Is the flash setting set to Forced OFF
[
]?
– Change the flash setting. (P36)
• The flash is not activated when motion
picture mode [
], [SCENERY] (P47),
[NIGHT SCENERY] (P48),
[FIREWORKS] (P50) or [STARRY SKY]
(P51) in scene mode is selected.
[FIREWORKS] (P50) or [STARRY SKY]
(P51) in scene mode is selected.
2: The flash is activated 2 times.
• When you select red-eye reduction (P36),
the flash is activated once before the
actual recording to reduce the red-eye
phenomenon (eyes of the subject
appearing red in the picture) and then
activated again for the actual recording.
actual recording to reduce the red-eye
phenomenon (eyes of the subject
appearing red in the picture) and then
activated again for the actual recording.
VQT0V86ENG.book 95 ページ ２００６年１月３０日 月曜日 午前９時４６分