Sony 4-133-499-11 (1) ユーザーズマニュアル
141
Printing images
Printing images
Specifying DPOF
Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
• If you unspecify DPOF, the index print is also canceled.
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
• If you unspecify DPOF, the index print is also canceled.
MENU button t
1
t [DPOF setup] t [All images] or
[Cancel all] t [OK]
Specifying /unspecifying DPOF on selected images
1
MENU button t
1
t [DPOF setup] t [Marked images]
An image is displayed on the single screen.
2
Select the image with b/B on the controller.
3
Select the number of sheets with the
/
buttons.
• To unspecify DPOF, set the number to “0.”
4
Press the MENU button.
5
Select [OK] with v on the controller, then press the center of
the controller.
the controller.
Specifying/unspecifying DPOF on all the images