JVC LYT0944-001A ユーザーズマニュアル

EN 

Rewind Button (2)

Fast-Forward
Button (3)

Play/Pause Button (4/6)

Stop Button (5)

Load a tape (

墌

 pg. 12).

Set the Power Switch to “PLAY” while pressing down

the Lock Button located on the switch. To start playback,
press 4/6.
• To stop playback, press 5.
• Press 2 to rewind, or 3 to fast-forward the tape

during Stop mode.

..... slide the Power Zoom Lever (VOL.) towards “+”

to turn up the volume, or towards “–” to turn down
the volume.

● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To

turn on again, set the Power Switch to “OFF”, then to “PLAY”.

● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (

墌

 pg. 20).

● You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

● LCD monitor/viewfinder indications:

• When power is supplied from a battery: the “

” battery pack remaining power indicator is displayed.

When power is supplied from an AC outlet: “

” does not appear.

• During Stop mode, none of the indications are displayed.

● When a cable is connected to the AV connector, the sound is not heard from the speaker.

Pauses during playback.

1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.

● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

● When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.

Allows high-speed search in either direction.

1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.

● During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you

release it, normal playback resumes.

● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

 Allows frame-by-frame search.

1) Engage Still Playback.
2) Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for

reverse Frame-By-Frame Playback during Still Playback.

● To resume normal playback, press 4/6.

During Shuttle Search, parts of the picture may not be clearly visible, particularly on
the left side of the screen.