Motorola MT 1500 ユーザーズマニュアル
MT 1500
Digital Portable Radio, Model 1.5
Quick Reference Card
Digital Portable Radio, Model 1.5
Quick Reference Card
Product Safety and RF Exposure Compliance
ATTENTION!
This radio is restricted to occupational use only to satisfy
FCC RF energy exposure requirements. Before using this
product, read the RF energy awareness information and
operating instructions in the Product Safety and RF
Exposure booklet enclosed with your radio (Motorola
Publication part number 6881095C98) to ensure
compliance with RF energy exposure limits .
FCC RF energy exposure requirements. Before using this
product, read the RF energy awareness information and
operating instructions in the Product Safety and RF
Exposure booklet enclosed with your radio (Motorola
Publication part number 6881095C98) to ensure
compliance with RF energy exposure limits .
Write your radio’s programmed features on the
dashed lines.
dashed lines.
Radio On/Off
Zones/Channels
Receive/Transmit
Send an Emergency Alarm
Send a Silent Emergency Alarm
Send an Emergency Call
Before using this product, read the operating instructions
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
!
C a u t i o n
3-Position
Rotary Switch
_ _ _ _ _ _
Rotary Switch
_ _ _ _ _ _
Channel
Select Knob
Select Knob
Speaker/Mic
Top Button
_ _ _ _ _ _ _
_ _ _ _ _ _ _
Top Side
Button
_ _ _ _ _ _ _
Button
_ _ _ _ _ _ _
On/Off/
Volume Knob
Volume Knob
Side Button 1
_ _ _ _ _ _ _
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
_ _ _ _ _ _ _
PTT Button
Display
1
On – On/Off/Volume knob clockwise.
2
Off – On/Off/Volume knob counterclockwise.
1
Zone – Move Zone switch to desired zone.
2
Channel – Turn Channel Selector knob to
desired channel.
desired channel.
1
Radio on and select zone/channel.
2
Listen for a transmission.
OR
Press and hold Volume Set button. Release
Volume Set button.
OR
Press Monitor button and listen for activity.
OR
Press and hold Volume Set button. Release
Volume Set button.
OR
Press Monitor button and listen for activity.
3
Adjust volume, if necessary.
4
Press and hold PTT to transmit; release to
listen.
listen.
1
Radio on and press Emergency button. You
see red LED; you hear short, medium-pitched
tone.
see red LED; you hear short, medium-pitched
tone.
2
Display shows
.
3
When acknowledgment is received, you hear
four tones; alarm ends; radio exits
emergency.
four tones; alarm ends; radio exits
emergency.
1
Radio on and press Emergency button. You
see no LED lights turn on; you hear no tone.
see no LED lights turn on; you hear no tone.
2
Press PTT.
3
Alarm continues until you exit by:
• Press and hold Emergency button for one
• Press and hold Emergency button for one
second.
OR
• Press and release PTT.
• Press and release PTT.
1
Radio on and press Emergency button. A
short, medium-pitched tone sounds.
short, medium-pitched tone sounds.
2
Press and hold PTT. Announce your
emergency into the microphone.
emergency into the microphone.
3
Release PTT to end call.
4
Press and hold Emergency button for one
second to exit.
second to exit.
EMERGENCY
MT1500 1.5 UG.book Page 1 Thursday, May 8, 2008 11:17 AM