Energizer FLEX8C ユーザーズマニュアル

 

8

 
The SETUP menu shown in Figure 2-1 appears on startup.  Always select 
CONNECT RECORDER to read the settings of the attached RECORDER. The 
top right half of the screen displays the Current Recorder Settings of the 
RECORDER.  Note the "Bad Chips" 0 of  “X” for the HAWK, if you have any bad 
memory chips in the RECORDER please call ADS and make arrangements to 
have us repair the RECORDER at no cost to you. A RECORDER with some bad 
chips is still usable, however the record time is reduced proportionately. 
 
2.1 SETUP Settings - Descriptions and Functions 

The RECORDER Clock is set to the same date/time as the PC; hence ensure 
that the date/time on the PC is correct.  The PC button configures the computer 
time.  The RECORDER button syncs the computer and recorder times.  Refer 
to Figure 2.1.1 Setup Menu. The Date/Time on the bottom of the screen is the 
PC's, while the top of the screen displays the RECORDER Date/Time.  
 
NOTE! The DATE format MM/DD/YYYY is set from the Windows CONTROL 
PANEL. Hence if you want European format you can select it from "GLOBAL" 
settings.