Western Digital WDBABZ5000ABK-NESN ユーザーズマニュアル

WD TV Live Hub Media Center

User Manual

FEATURES AND FUNCTIONS – 8

1

Power button 

• When power LED is on:

-

Press the power button to power down the media center. 
The internal drive is put in sleep mode and other devices 
can still access it.

-

Press and hold for five seconds to completely shut down 
the device and make the internal drive inaccessible.

• When power LED is off—Press the power button to power on 

the media center and wake the internal drive.

2

Power LED 
(WD logo)

• On—The power cable is connected and the power is on.

• Off—The media center is in standby mode , turned off, or the 

power cable is disconnected.

• Steady flashing— A USB device has been discovered and the 

unit is being mounted in the system. If the Media Library is set 
to On in the Setup options (see “Media Library Compilation” on 
page 29), the LED flashes at the same steady constant rate.

• Three short flashes followed by three long flashed followed by 

three short flashes—A system diagnostic failure has occurred. 
See “Troubleshooting” on page 172.

3

Infrared 
receiver

• Receives signals from the remote control. Point the tip of the 

remote control to the infrared receiver and ensure that the path 
between the two is unobstructed.

1

3

2