Mitsubishi Electronics Q13UD(E)HCPU ユーザーズマニュアル
80
4.2.2
Parameter settings
This section describes parameters required for the system configuration on Page 79, Section 4.2.1. Use a
programming tool to set parameters.
programming tool to set parameters.
• Settings of parameters in double-lined squares on Page 77, Section 4.2 (1) must be the same in all the CPU
modules in a multiple CPU system.
• The necessity of parameters differs depending on the QCPU used. (
(1) Setting parameters (for the first time)
1.
Set "Points Occupied by Empty Slot" in the "PLC System" window of PLC parameter.
Project window
[Parameter]
[PLC Parameter]
[PLC System]
"Points Occupied by
Empty Slot"
2.
Set parameters for the multiple CPU system in the "Multiple CPU Setting" window of PLC
parameter.
parameter.
Project window
[Parameter]
[PLC Parameter]
[Multiple CPU Setting]
Item
Description
Default
Points Occupied by Empty Slot
Set the number of points occupied by one empty slot.
16 points