Mitsubishi Electronics Q25PHCPU ユーザーズマニュアル
187
APPENDICES
A
Appendix 2 Compar
ison with a Single CPU System
*1
When the Q00UCPU, Q01UCPU, or Q02UCPU is used as CPU No.1, this parameter cannot be set.
*2
AnS/A series-compatible modules can be used with a Universal model QCPU with a serial number (first five digits) of
"13102" or later.
"13102" or later.
Item
Single CPU system
Multiple CPU system
Reference
Parameter
Parameters added for
multiple CPU systems
multiple CPU systems
Not supported
• Number of CPU modules
("Multiple CPU Setting")
• Control PLC setting ("I/O
Assignment")
• Out-of-group I/O setting ("Multiple
CPU Setting")
• Operation mode when a stop
error has occurred in a CPU
module ("Multiple CPU Setting")
module ("Multiple CPU Setting")
• Multiple CPU synchronous startup
("Multiple CPU Setting")
• Multiple CPU high speed
transmission area setting
("Multiple CPU Setting")
*1
• Communication area setting
("Refresh Setting")
• Settings of some parameters
must be the same for all the CPU
modules while others can be set
individually for each CPU module.
modules while others can be set
individually for each CPU module.
Caution
AnS/A series module
*2
Supported
Supported only when a Universal
model QCPU is set as a control
CPU.
model QCPU is set as a control
CPU.