A&D HW-10KGL ユーザーズマニュアル
HW-G Instruction Manual Page 43
HW-G OZIM v1a
15 The Function Table
The function table is provided to store and reference items that determine the
performance of the scale. Each item has a parameter.
The parameters are maintained even without power applied.
performance of the scale. Each item has a parameter.
The parameters are maintained even without power applied.
15.1 The Procedure for Setting Parameters
Step 1
Turn off the display.
Press the
Press the
ON/OFF
switch while the
ZERO
switch is
pressed and held. The function table is displayed.
Step 2 Set parameters for each item using the following
switches.
^
switch
Selecting the parameter of an item.
Selecting the value of a digit at
Selecting the value of a digit at
f16
.
<
switch
Selecting a digit at
f16
.
F
switch
Proceeding to the end of the table
without storing the parameter.
without storing the parameter.
ENTER
switch Storing a parameter for the current
item and proceeding to the next item.
Returning to normal mode from the
end of the table.
Returning to normal mode from the
end of the table.
Step 3 Press the
ENTER
switch to return to the normal mode,
when
end
is displayed.
Note Pressing the
ENTER
switch on step 2, the parameter is
stored in the scale.
Note Pressing the F switch at any time will cause
end
to be
displayed. The press ENTER to return to the normal mode.