Tascam CC-222MKIV ユーザーズマニュアル

• 

Do not expose the infrared receiver (light receptive area 

on the front panel) to direct sunlight or intense light for 

extended periods of time. Long exposure to this light 

may result in failure of the remote control sensor.

• 

When the remote control will not be used over one 

month, please remove the batteries to prevent the possi-

bility of battery acid leakage which could damage the 

unit. Should leakage occur, remove and discard the 

batteries, and wipe the battery case thoroughly with a 

cloth. Avoid getting the battery liquid on the skin. After 

cleaning, replace with new batteries.

• 

The remote control functions by using an infrared light 

signal. When using the unit to control the CC-222

MK

IV, 

other devices that are turned on could be operated by its 

signal.

• 

If the range of remote operation becomes smaller, or 

commands do not always function properly, the batter-

ies have become weak and should be replaced. Always 

replace both batteries with new batteries of the same type.

• 

Point the remote control to the remote sensor on the 

main unit. Do not obstruct the path between the remote 

control and the remote sensor.

If batteries are used improperly, or if leakage or breakage 

occurs, the unit will not function. 
Please observe the cautions indicated on the batteries and 

their packaging to ensure proper usage.

• 

Confirm + and – polarity and follow the indications 

when inserting new batteries into the remote control.

• 

Do not use old and new batteries together.

• 

Even if the battery is the same size, the voltage may 

differ. Do not use batteries of different specifications 

together.

• 

Do not attempt to recharge batteries that are non-

rechargeable.

• 

Do not open or disassemble batteries, throw them into a 

fire or put them in water.

NOTE