Golden Technologies GA 541 ユーザーズマニュアル

Avenger Owner’s Manual   

 
 
 

 
SEAT CONTROLS 
Armrest Height Adjustments can be made by removing the 2 
screws on the back of the armrest and raising to a comfortable 
position and resetting the screws. The armrest can be raised 3” 
and by replacing only 1 screw. You can raise the armrest and 
replace both screws. You will require a 6mm allen wrench for this 
task. 

Armrest Width Adjustment 
To adjust the armrest width: 

1.  Loosen the (2) 6mm adjustment screws at the rear of  
each arm. Slide each arm to the desired width and tighten  
the screws. 

 
 
Seat Height Adjustment  (Picture Not Shown)  
To adjust the seat height: Lift up on seat rotate lever and turn  
seat either left or right, lift seat straight up. Holding rotate 
lever in the up position while lifting seat may make this task 
easier. Remove 17mm machine screw and place seat post 
at the desired height and re-insert screw.  
 
 
Seat Rotation Lever 
The seat can be rotated through 360

° and locked at any  

90

° position. 

1.  Pull up on the seat rotate lever and rotate the seat  

to the desired position. 

2.  Release the handle to lock the seat at any 90

° position. 

 

 

 
Flip-Up Armrests 
Pull up on the end of either armrest to flip it up for easy 
transfer on and off your Golden Avenger

™. 

 
 
Seating