Razor E325S 13116390 ユーザーズマニュアル

12

Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com 
or call toll-free at 

866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com 
or call toll-free at 

866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

Sometimes the scooter 

doesn’t run, but other 

times it does

Charger gets warm 

during use

Scooter does not stop 

when applying the brake 

Scooter makes loud 

noises or grinding 

sounds

Brakes are not adjusted properly

Loose wires or connectors

Motor or electrical switch 

damage

Normal response to charger use

Brakes are not adjusted properly

Chain is too dry

 

Brake rotor is dragging on brake 

pads 

Refer to adjusting the brakes instructions on page 4.

Check all wires around the motors and all connectors to make sure 

they are tight.

Contact your local Razor authorized service center for diagnosis and 

repair.

No action required. This is normal for some chargers and is no cause 

for concern. If your charger does not get warm during use, it does not 

mean that it is not working properly.

Refer to adjusting the brakes instructions on page 4.

 

Apply a lubricant such as 3 in 1

TM

 or Tri-Flow

TM

 to the chain.

Use your fingers to twist the caliper adjuster in either direction until 

rotor is centered between pads.