Universal Remote Control A6 ユーザーズマニュアル

Page 17

• You can program up to 20 commands on each 

Macro button.

• You can program delays in between commands 

by pressing the PAUSE button. Each press adds
a one-half second delay.

• Also, if you add the delay time as the first step 

of Macro commands, the remote will not send 
the Macro unless the button is held for two 
seconds. (This is the Press & Hold Function).

• You can also program macro commands in

‘layers’ by pressing the STOP button in between
commands. (For example, if you press CBL,
009, STOP, 035, STOP, 365, STOP and the
CH+ button in Step 2) the remote will send out
009 at the first press of the ‘A’ button, and then
send out 035 at the second press, etc.

• You cannot program the CH+ or PAUSE

buttons as macro commands.