Patton electronic 4.00E+01 ユーザーズマニュアル

Communicating With a System

Model 1195 Getting Started Guide 

To communicate with the system, you have to make a connection with the system through a TCP or COM 
port. 

To select a COM port:

1. Click on the Option menu at the top of the screen and select TCP/COM (Single System).

Figure 12. Select COM port

2. From the drop-down menu, select the COM port that is in use. The message “COM X is selected” will 

display.

3. Click OK.

To access the system remotely, select TCP/IP Winsock.

1. Click on the Option menu at the top of the screen and select Communication (Single System).

Figure 13. Select TCP/IP address

2. From the drop-down menu, select the TCP/IP Winsock.

3. Select the IP address of the equipment in the field REMOTE HOST IP ADDRESS.