Panasonic KX-TG7100 ユーザーズマニュアル
Multi-unit Operation
29
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
L
When the handset has been
registered successfully, w will stop
flashing. If keytones are turned on
(page 16), a confirmation tone will be
heard.
registered successfully, w will stop
flashing. If keytones are turned on
(page 16), a confirmation tone will be
heard.
Cancelling a handset
A maximum of 6 handsets can be registered
to the base unit. A handset can cancel its
own registration (or the registration of
another handset) that is stored in the base
unit. This will allow the base unit to “forget”
the handset.
to the base unit. A handset can cancel its
own registration (or the registration of
another handset) that is stored in the base
unit. This will allow the base unit to “forget”
the handset.
1
{j
/OK} i “Base Unit Setup” i
{>}
2
Enter “335”.
3
“Cancel Handset” i {>}
L
L
The numbers of all handsets
registered to the base unit are
displayed.
registered to the base unit are
displayed.
4
Select the handset(s) you want to
cancel, by pressing the desired handset
number. i {j/OK}
cancel, by pressing the desired handset
number. i {j/OK}
L
The selected handset number(s) will
flash.
flash.
L
To cancel a selected handset number,
press the number again. The number
will stop flashing.
press the number again. The number
will stop flashing.
5
“Yes” i {>} i {ih}
Increasing the range of the base
unit
unit
You can increase the signal range of the
base unit by using a DECT repeater. Please
use only the Panasonic DECT repeater
noted on page 5. Consult your Panasonic
dealer for details.
Important:
base unit by using a DECT repeater. Please
use only the Panasonic DECT repeater
noted on page 5. Consult your Panasonic
dealer for details.
Important:
L
Before registering the repeater to this
base unit, you must turn the repeater
mode on.
base unit, you must turn the repeater
mode on.
L
Do not use more than one repeater at a
time.
time.
Setting the repeater mode
1
{j
/OK} i “Base Unit Setup” i
{>}
2
“Other Options” i {>}
3
“Repeater Mode” i {>}
4
“On” or “Off” i {>} i {ih}
Note:
L
After turning repeater mode on or off, w
will flash on the handset momentarily. This
is normal. The handset can be used once
w
will flash on the handset momentarily. This
is normal. The handset can be used once
w
stops flashing.
Intercom between
handsets
handsets
Intercom calls can be made between
handsets.
Example: When handset 1 calls handset 2
handsets.
Example: When handset 1 calls handset 2
1
Handset 1:
{
{
INT} i Press {2} (desired handset
number).
2
Handset 2:
Press {C} / {s} to answer.
Press {C} / {s} to answer.
3
When finished talking, press {ih}.
Transferring calls
between handsets
between handsets
Outside calls can be transferred between 2
people.
Example: When handset 1 transfers a call
to handset 2
people.
Example: When handset 1 transfers a call
to handset 2
1
Handset 1:
During an outside call, press {INT}. i
Press {2} (desired handset number).
During an outside call, press {INT}. i
Press {2} (desired handset number).
L
The outside call will be put on hold.
L
If there is no answer, press {INT} to
return to the outside call.
return to the outside call.
TG7100-7120E(e).book Page 29 Tuesday, July 4, 2006 3:29 PM