Panasonic KX-TH102-M ユーザーズマニュアル
F
Monitoring
For assistance, please visit http://www.panasonic.com/phonehelp
53
Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby’s room, for
example, from different areas of the
house.
You can monitor:
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby’s room, for
example, from different areas of the
house.
You can monitor:
– the sound in a room (“Audio monitor”,
page 53)
– the image and sound of a room (“Video
monitor using the handset”, page 54).
Note:
L You can place the handset on the
L You can place the handset on the
charger while monitoring using the
speakerphone.
speakerphone.
Enabling monitoring access
Y
o
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
set the destination unit to be monitored
beforehand.
– “Permit”: allows the unit to be
monitored.
– “Deny”: denies access from other units.
1
{MENU} (F2) i x i {SELECT}
2
“Monitor access”
i {SELECT}
3
Select the desired setting. (Default:
“Deny”)
“Deny”)
i {SAVE} i {OFF}
1
{MENU} i h i {SET}
2
“Monitor access”
i {SET}
3
Select the desired setting. (Default:
“Deny”)
“Deny”)
i {SET} i {STOP}
Audio monitor
This feature allows you to listen to the
audio in the room where the handset or
base unit is located.
audio in the room where the handset or
base unit is located.
Monitoring audio in the room
Y
o
1
{MENU} (F2) i H i {SELECT}
2
“Audio only”
i {SELECT}
3
Select the desired unit.
i {SELECT}
L You can listen to the audio.
4
Press
{OFF} to stop monitoring.
Note:
L To start monitoring quickly, press
L To start monitoring quickly, press
{INTERCOM}, then press {*} instead
of steps 1 and 2.
of steps 1 and 2.
1
{MENU} i F i {SET}
2
Select the desired unit.
i {SET}
L You can listen to the audio.
3
Press
{INTERCOM} to stop monitoring.
Note:
L To start monitoring quickly, press
L To start monitoring quickly, press
{INTERCOM}, then press {*} instead
of step 1.
of step 1.
Handset
Base unit
Before using this feature, allow access
to the destination unit by selecting
“Permit” in the monitor access setting
(page 53).
to the destination unit by selecting
“Permit” in the monitor access setting
(page 53).
Handset
Base unit