Multi-Tech Systems MVP-130/130FXS ユーザーズマニュアル

 

Power Connection

Network Connection

Ethernet Command

Power

FXS/FXO

Command Port Connection

PBX

PSTN

Telephony Connection

FXS

FXO

Hub

Cabling involves connecting the MultiVOIP to your LAN and telephone 
equipment.    

1. Connect the power cord supplied with your MultiVOIP to the power 

connector on the back of the MultiVOIP and to a live AC outlet as 
shown in Figure 3-18. 

2. Connect the MultiVOIP to a PC by using a RJ-45 (male) to DB-9 

(female) cable. Plug the RJ-45 end of the cable into the Command port 
of the MultiVOIP and the other end into the PC serial port. See Figure 
3-18. 

3. Connect a network cable to the ETHERNET 10/100 connector on the 

back of the MultiVOIP. Connect the other end of the cable to your 
network. 

4. Since the MVP130FXS supports the FXS interface only, its connection 

options differ from that of the MVP130, which supports both FXS and 
FXO. 

A. 

. To connect a station device such as an analog telephone, 

a fax machine, or a Key Telephone System (KTS) (FXS interface), or a 
PBX extension (FXO interface) to your MultiVOIP, attach one end of 
an RJ-11 phone cord to the Channel 1 FXS/FXO connector  on the 
back MultiVOIP and the other end to the device or phone jack. You 
will define the interface in the Interface dialog box in the software 
when you configure the unit.  

 

B. 

.  To connect a station device such as an analog 

telephone or fax machine to your MultiVOIP, attach one end of an RJ-
11 phone cord to the VOICE connector  on the back MultiVOIP and