Multi-Tech Systems MVP-130/130FXS ユーザーズマニュアル
MultiVOIP User Guide
Technical Configuration (Analog/BRI)
239
Voice/Fax Parameter Definitions (cont’d) )
Field Name Values
Description
Auto Disconnect
Automatic
Disconnect-
ion
Disconnect-
ion
-- The
Automatic Disconnection
group provides four options which
can be used singly or in any
combination.
can be used singly or in any
combination.
Jitter Value
1-65535
milli-
seconds
milli-
seconds
The Jitter Value defines the average
inter-arrival packet deviation (in
milliseconds) before the call is
automatically disconnected. The
default is 300 milliseconds. A higher
value means voice transmission will
be more accepting of jitter. A lower
value is less tolerant of jitter.
Inactive by default. When active,
default = 300 ms. However, value
must equal or exceed Dynamic
Minimum Jitter Value.
inter-arrival packet deviation (in
milliseconds) before the call is
automatically disconnected. The
default is 300 milliseconds. A higher
value means voice transmission will
be more accepting of jitter. A lower
value is less tolerant of jitter.
Inactive by default. When active,
default = 300 ms. However, value
must equal or exceed Dynamic
Minimum Jitter Value.
Call
Duration
Duration
1-65535
seconds
seconds
Call Duration
defines the
maximum length of time (in
seconds) that a call remains
connected before the call is
automatically disconnected.
Inactive by default.
When active, default = 180 sec.
This may be too short for most
configurations, requiring upward
adjustment.
seconds) that a call remains
connected before the call is
automatically disconnected.
Inactive by default.
When active, default = 180 sec.
This may be too short for most
configurations, requiring upward
adjustment.
Consecutive
Packets Lost
Packets Lost
1-65535
Consecutive Packets Lost
defines
the number of consecutive packets
that are lost after which the call is
automatically disconnected.
Inactive by default.
When active, default = 30
that are lost after which the call is
automatically disconnected.
Inactive by default.
When active, default = 30
Network
Discon-
nection
Discon-
nection
1 to 65535
seconds;
Default =
30 sec.
seconds;
Default =
30 sec.
Specifies how long to wait before
disconnecting the call when IP
network connectivity with the
remote site has been lost.
disconnecting the call when IP
network connectivity with the
remote site has been lost.