Multi-Tech Systems MVP-130/130FXS ユーザーズマニュアル

 

 

 

Indicates presence of power. 

After power up, the Boot LED will be on briefly while 
the MultiVOIP is booting.  It lights whenever the 
MultiVOIP is booting or downloading a setup 
configuration data set. 

FDX.  LED indicates whether Ethernet connection is 
half-duplex or full-duplex (FDX) and, in half-duplex 
mode, indicates occurrence of data collisions.  LED is 
on constantly for full-duplex mode; LED is off 
constantly for half-duplex mode.  When operating in 
half-duplex mode, the LED will flash during data 
collisions. 
LNK.

  Link/Activity LED.  This LED is lit if Ethernet 

connection has been made.  It is off when the link is 
down (i.e., when no Ethernet connection exists).  
While link is up, this LED will flash off to indicate data 
activity.  

 

 

.  This indicator blinks when voice packets 

are being transmitted to the local area network.

 

 

 

.    This indicator blinks when voice packets 

are being received from the local area network. 

 

 

 

Transmit Signal.  This indicator lights when the 
FXS-configured channel is off-hook or the FXO-
configured channel (MVP130 only) is receiving a ring 
from the Telco or PBX.  

 

. This indicator lights when the FXS-

configured channel is ringing or the FXO-configured 
channel (MVP130 only) has taken the line off-hook.