JVC HM-HDS4E ユーザーズマニュアル
Masterpage:Right-NoTitle0
EN
23
Filename [HM-HDS4EX_04Basic.fm]
Page 23
April 2, 2003 2:20 pm
Basic Playback
A
Turn on the recorder.
Press 1.
● The button corresponding to the previously selected deck
lights on the recorder.
B
Select the HDD deck.
On the recorder
Press S-VHS/HDD repeatedly until HDD indicator lights.
On the remote control
Press HDD.
Press S-VHS/HDD repeatedly until HDD indicator lights.
On the remote control
Press HDD.
● The HDD indicator lights on the recorder.
C
Start playback.
Press
4
.
One of the following screens will appear:
– the programme which has been recorded on the HDD deck at
last time and has not been played back yet
– the programme which has been stopped during playback
– the HDD Navigation screen (
– the HDD Navigation screen (
墌
pg. 24)
● There are some programmes for demonstration on the HDD
deck when it is shipped from the factory.
D
Pause playback.
Press
9
.
● To resume normal playback, press 4.
E
Stop playback.
Press 8.
● The HDD play indicator turns off.
NOTE:
While recording a programme, you can play back the previously
recorded part by “Live Memory Playback” (
recorded part by “Live Memory Playback” (
墌
pg. 28).
Recording Speed on the HDD deck
This recorder has a 80 Gbyte hard disk drive. The pictures and
sounds recorded on the HDD deck and other information are
written down on the hard disk drive.
As recording format for the HDD deck, MPEG2 format, the same
for DVD, is used. As a guide for picture quality, the “bps” unit is
used to represent how much data can be recorded per second.
The larger this value, the better the picture quality is but the
more capacity is required for recording. Select SP for
programmes where quick movement occurs, such as sports
programmes, and SEP for talk shows, etc. where relativity less
movement.
The recording speeds of the recorder are set as follows:
sounds recorded on the HDD deck and other information are
written down on the hard disk drive.
As recording format for the HDD deck, MPEG2 format, the same
for DVD, is used. As a guide for picture quality, the “bps” unit is
used to represent how much data can be recorded per second.
The larger this value, the better the picture quality is but the
more capacity is required for recording. Select SP for
programmes where quick movement occurs, such as sports
programmes, and SEP for talk shows, etc. where relativity less
movement.
The recording speeds of the recorder are set as follows:
* When “LIVE MEMORY” is set to “OFF”. (
墌
pg. 81)
NOTE:
The picture may be blurred or distorted when you start recording
or playback in DV recording speed. However, this is not a
malfunction of the recorder.
or playback in DV recording speed. However, this is not a
malfunction of the recorder.
● Turn on the TV and select the AV mode.
● Slide TV/CABLE/SAT switch to the right.
● If the recorder is turned on with HDD deck selected,
there may be about 30 seconds’ delay in starting to
show pictures on the screen.
show pictures on the screen.
?
Recording
speed
Recording amount
(approx.)
Maximum recording
time (approx.)
DV
25 Mbps
7 hours*
SP
6.4 Mbps
20 hours
LP
4.5 Mbps
28 hours
EP
3.2 Mbps
56 hours
SEP
2.2 Mbps
80 hours
HM-HDS4EX.book Page 23 Wednesday, April 2, 2003 3:55 PM