ALK Technologies 7 ユーザーズマニュアル

If you selected Built-In you will need to choose 
between Automatic and Manual. We recommend 
Automatic setup. 

With Automatic selected, tap Finish. CoPilot will fi nd 
and connect to the GPS receiver in your device.

To set up Manually, select Manual, you will need to 
select the COM Port that the GPS is connected to and 
the BAUD rate for the device. Please consult 
your device manufacturer for this information.

When you have entered the information tap Finish to 
continue. Once setup has been completed select Finish 
to complete the process.

 If you get the message GPS Setup failed the 

COM Port and/or BAUD information were incorrect. 
Please try again.

You’re ready for your fi rst trip!

 The fi rst time you use the GPS receiver it may take a moment

to determine your position.

If you selected Other you will need to connect the GPS Receiver manually.

You will need to select the COM Port that the GPS is connected to and the BAUD 
rate for the device. Please consult your device manufacturer for this information.

Tap Finish to continue. Once setup has been completed tap Finish to exit.

You’re ready for your fi rst trip!

 The fi rst time you use the GPS receiver it may take 

a moment to determine your position.

GPS signal will be limited inside buildings, tunnels or 
parking lots. To work effectively the GPS receiver 
needs to have a clear line of sight to the sky.

      01 Getting started