ZyXEL Communications 2000W_V2 ユーザーズマニュアル

Prestige 2000W_V2 Quick Start Guide

5

Press the Power/End key for two seconds to turn on the Prestige. The Prestige searches for the available 
wireless network with the best signal. It then restarts and attempts to connect to the wireless network.

If the LCD screen displays Not Registered, the Prestige is connected to the Internet 
and you can skip to 

. 

Note: If the LCD screen displays Registered, skip to 

.

If any other message displays or you want to select a specific network, please 
continue with the following steps.

 

1 In the main screen, press the Left key to enter the menus.

 

2 Use the down arrow key to scroll to Wireless and press the OK key.

3 Use the down arrow key to scroll to Site Survey and press the OK key.

The Prestige checks for and displays a list of available wireless networks and 
each one’s signal strength. 

4 Scroll to the name of the wireless network that you want to use and press the 

OK key. If a “W” appears next to the network name, or if you know WEP 
encryption is required for your network, then continue with 

,  

Otherwise, skip to