Cisco Systems 78-10450-02 ユーザーズマニュアル
C H A P T E R
46-1
Cisco CallManager Administration Guide
78-10450-02
46
Configuring Cisco IP Phones in
Cisco CallManager
Cisco CallManager
Cisco IP Phones are full-featured telephones that can be plugged directly into
your IP network. Cisco CallManager supports the following Cisco IP Phones:
your IP network. Cisco CallManager supports the following Cisco IP Phones:
•
•
•
The following devices are also configured through the Cisco CallManager
Administration phone configuration pages:
Administration phone configuration pages:
•
•
Note
Devices such as analog phones or fax machines must be connected
to a gateway (for example, a Cisco VG200 gateway).
to a gateway (for example, a Cisco VG200 gateway).
If you are administering a large number of phones at your site, you can use the
Bulk Administration Tool (BAT) to perform batch add, modify, and delete
operations for Cisco IP Phones instead of manually adding and configuring each
phone using Cisco CallManager Administration.
Bulk Administration Tool (BAT) to perform batch add, modify, and delete
operations for Cisco IP Phones instead of manually adding and configuring each
phone using Cisco CallManager Administration.
BAT is a plug-in application for Cisco CallManager. If BAT is already installed
on your Cisco CallManager system, it can be accessed by opening
Cisco CallManager administration and selecting Application > BAT.
on your Cisco CallManager system, it can be accessed by opening
Cisco CallManager administration and selecting Application > BAT.