VTech i6775 ユーザーズマニュアル

STEP 1 Check package contents

Make sure your phone’s packaging includes the following:

STEP 3 Battery installation

1. Align the two holes in the plug with the socket pins,

then snap the plug into place. Place the battery in the

compartment with the wires in the upper right corner.

2. Replace cover by sliding it upwards until it clicks into

place.

STEP 4 Charge the battery

1. Place the handset in the base unit/chargers.
2. Charge the battery for at least 16 hours before first use.

Quick Start Guide

i6775

STEP 2 Connect power to telephone base/

chargers

Plug the power adaptor into an electrical outlet not controlled

by a wall switch, and the connector into the power jack on

bottom of the telephone base/chargers.

NOTE:

• Use only the power adaptors supplied with your

VTech telephone.

STEP 5 Connect to phone line

Plug one end of the telephone line cord into the telephone line

jack at the bottom of the telephone base. Then plug the other
end of the cord into the wall telephone outlet.

Step 7 Set the clock

1. Press

TIME/SET to listen to the current setting.

2. Press

TIME/SET again to indicate changes needed.

3. Press

CHANGE to change the day, hour, minute, or year.

4. When you hear the correct setting, press

TIME/SET to

advance to the next setting.

Step 8 Record your outgoing announcement

1. Press

SETUP, the system announces “Announcement.

Press

PLAY or press RECORD. To continue setup, press

SETUP.”

2. Press

REC/MEMO and speak toward the MIC on the base

to record an announcement for up to 90 seconds.

3. Press

PLAY/STOP / (when finished recording).

Hanging up

Press

OFF or place

the handset in its

base/chargers.

IMPORTANT!

If your product is not working properly:

1. Refer to your user’s manual.
2. Visit our website at www.vtechphones.com or

www. vtechcanada.com in Canada.

3. Call our customer service at 1-800-595-9511 or

1-800-267 7377 in Canada.

NOTE:

If you have caller ID service, the time will automatically

be updated with the first incoming call after your

program the year into the system.

NOTE:

For complete feature instructions, please refer to your

user’s manual.

AC power outlet

Telephone outlet

STEP 6 Making and receiving calls

Making a call

• Press

TALK/FLASH or SPEAKER and listen for dial

tone.

•  Dial the phone number.
-OR-
•   Dial the phone number.
•   Press

TALK/FLASH.

Receiving a call

Press

TALK/FLASH, SPEAKERPHONE, or any dialing key

except

OFF.

96-006097-010-000

issue 0

Base unit

Handsets (3)

Telephone

line cord

Batteries (3)

Belt clips (3)

Wall mount

bracket

Base power adaptor

Charger power adaptors (2)

User’s manual

Chargers (2)

Quick start

guide